| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | ALUMINUM ALLOY 2024 |
| EXTENDED LENGTH | 14.670 INCHES MINIMUM AND |
| 14.850 INCHES MAXIMUM |
| COMPRESSED LENGTH | 7.780 INCHES MINIMUM AND |
| 8.060 INCHES MAXIMUM |
| BORE DIAMETER | 1.250 INCHES MINIMUM AND |
| 1.260 INCHES MAXIMUM |
| BODY MATERIAL | ALUMINUM ALLOY,COMP 2024,TEMPER T4 |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| OVERALL WIDTH | 2.370 INCHES NOMINAL |
| OVERALL HEIGHT | 1.812 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 1.300 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 0.3112 INCHES MINIMUM AND |
| 0.3117 INCHES MAXIMUM |
| MOUNTING TYPE AND LOCATION | TRUNNION PISTON ROD END |
| MOUNTING PROVISION | THREADED MOUNTING STUDS |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNF |
| MOUNTING FACILITY THREAD DIAMETER | 0.190 INCHES NOMINAL |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 10 |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD LENGTH | 0.313 INCHES NOMINAL |
| MOUNTING FACILITY LENGTH | 1.837 INCHES NOMINAL |
| PORT LOCATION AND QUANTITY | 2 CYLINDER HEAD END |
| PORT STYLE | GASKET SEAL |
| PORT THREAD SERIES DESIGNATOR | UNJF |
| PORT THREAD DIAMETER | 0.4375 INCHES NOMINAL |
| PORT THREAD QUANTITY PER INCH | 20 |
| PORT THREAD CLASS | 3A |
| SEAT ANGLE IN DEG | 120.0 |
| TEMP RATING | -65.0 DEG FAHRENHEIT |
| 160.0 DEG FAHRENHEIT |
| PRESSURE RATING | 300.0 POUNDS PER SQUARE INCH NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 53583 |
| DESIGN CONTROL REFERENCE | 1450 |