|
|
|
National Stock Number:
1650-00-554-7430
Federal Supply Class:
1650
National Item Identification Number:
005547430
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1650005547430 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 1650PL0974260 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 2180432 | 03640 | LOCKHEED MARTIN CORPORATION | | 2180432 | 23892 | LOCKHEED MARTIN SERVICES, LLC | | 28115G | 22852 | SPALLA INC | | 28115G | 90005 | PUROLATOR FACET INC. | | 30021-3 | 64829 | ARVINMERITOR INC | | 4889 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | 572574 | 90005 | PUROLATOR FACET INC. | | 572754 | 90005 | PUROLATOR FACET INC. | | 6655565 | 05228 | PTI TECHNOLOGIES INC. | | 7084204 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 751759 | 77294 | PIPER INDUSTRIAL MANUFACTURING COMPANY, LLC | | 8110-2 | 13520 | DONALDSON COMPANY, INC. | | AN6235-1A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN6235-1A (PAPER) | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | AN6235-1A (PAPER) | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FE115 | 05448 | PARKER-HANNIFIN CORPORATION | | MIL-F-5504 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| TEST DATA DOCUMENT | 81349-MILF5504 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.797 INCHES MINIMUM AND 0.859 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.375 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.875 INCHES MINIMUM AND 1.938 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | ANY ACCEPTABLE SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM COMPONENT,ACFT | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM |
|
|