|
|
|
National Stock Number:
1650-00-518-1326
Federal Supply Class:
1650
National Item Identification Number:
005181326
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7509200 | 05228 | PTI TECHNOLOGIES INC. |
|
Techincal Specification:
| BODY DIAMETER | 1.125 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.625 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.625 INCHES MINIMUM AND 4.687 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 2.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE SEAL | | MATERIAL | CELLULOSE AND RESIN SYNTHETIC FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NONDEFINITIVE SPEC/STD DATA | 2A TYPE | | SPECIAL FEATURES | W/ END CAPS | | SPECIFICATION/STANDARD DATA | 88044-SN6235 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|