|
|
|
National Stock Number:
1650-00-516-4515
Federal Supply Class:
1650
National Item Identification Number:
005164515
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1650PL0707389 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 19008 | 99851 | EWING PRODUCTS INC | | 55504 | 05228 | PTI TECHNOLOGIES INC. | | 55504 | 64829 | ARVINMERITOR INC | | 668100 | 98897 | LOCKHEED MARTIN CORP | | 695481-3 | 05228 | PTI TECHNOLOGIES INC. | | 695481-3 | 64829 | ARVINMERITOR INC | | 695481-3 | 98897 | LOCKHEED MARTIN CORP | | AA1164-1 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 40.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.779 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.600 INCHES MINIMUM AND 1.625 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 3000.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 0.312 INCHES | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|