|
|
|
National Stock Number:
1650-00-513-4945
Federal Supply Class:
1650
National Item Identification Number:
005134945
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 28055-D | 90005 | PUROLATOR FACET INC. | | 28055-E | 90005 | PUROLATOR FACET INC. | | 30315-1 | 64829 | ARVINMERITOR INC | | 30315-20 | 05228 | PTI TECHNOLOGIES INC. | | 30315-20 | 64829 | ARVINMERITOR INC | | 30315-20 | 81873 | WOODWARD HRT INC | | 325978 | 13520 | DONALDSON COMPANY, INC. | | 4897 | 87405 | FACET (OKLAHOMA) LLC | | 4898 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | 4898 | 87405 | FACET (OKLAHOMA) LLC | | 506-85058 | 9F512 | PARKER-HANNIFIN CORPORATION | | 506-85063 | 9F512 | PARKER-HANNIFIN CORPORATION | | 6269-10 | 94592 | FLUID CONDITIONING PRODUCTS, INC. | | AN6236-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | AN6236-2 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | C1602PL2 | 73370 | HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV CONSUMER PRODUCTS GROUP | | F5504 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-5504 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 5.937 INCHES MINIMUM AND 6.000 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.937 INCHES MINIMUM AND 4.000 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 2.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MATERIAL | COTTON BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | T | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 160.0 FAHRENHEIT MAXIMUM |
|
|