| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-4 |
| CONNECTION QUANTITY | 1 |
| CONNECTION DESIGN | THREADED |
| CONNECTION TYPE | INLET AND OUTLET |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINU 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 0.938 IN. BY 0.938 IN. |
| MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 14070.0 |
| PITCH DIAMETER | 0.312 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNJF |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SPLINE PITCH | 32/64 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 10 |
| SPLINE LENGTH | 0.660 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.438-20 |
| TORQUE LOAD RATING | 22.0 INCH-POUNDS |