|
|
|
National Stock Number:
1650-00-498-1565
Federal Supply Class:
1650
National Item Identification Number:
004981565
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21-10979-20 | 05228 | PTI TECHNOLOGIES INC. | | 21-10979-20 | 81873 | WOODWARD HRT INC | | AC-8397F-20 | 18350 | PALL AEROPOWER CORPORATION | | 82699-20 | 59211 | PARKER-HANNIFIN CORPORATION | | 82699-20 | 82106 | PARKER-HANNIFIN CORPORATION | | 21-10979-20 | 96124 | TRANSDIGM INC | | AC8397E20 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 90.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.375 INCHES NOMINAL | | BODY OVERALL LENGTH | 2.915 INCHES MINIMUM AND 2.955 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 3000.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | CONTROLLER,FLIGHT,AUTOMATIC PILOT | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM | | TEST DATA DOCUMENT | 82699-82106 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|