|
|
|
National Stock Number:
1650-00-494-9563
Federal Supply Class:
1650
National Item Identification Number:
004949563
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC900F7UP1 | 18350 | PALL AEROPOWER CORPORATION | | MILF8815-11A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 15.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.905 INCHES MINIMUM AND 0.909 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.488 INCHES MINIMUM AND 0.498 INCHES MAXIMUM | | BODY OVERALL LENGTH | 4.487 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 600.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | FILTER,FLUID PRESSURE AIRCRAFT HYDRAULIC SYSTEM | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | 275.0 FAHRENHEIT NOMINAL |
|
|