|
|
|
National Stock Number:
1650-00-487-7556
Federal Supply Class:
1650
National Item Identification Number:
004877556
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21954-3 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 7554261 | 64829 | ARVINMERITOR INC | | 7554263 | 05228 | PTI TECHNOLOGIES INC. | | 856504-3 | 59364 | HONEYWELL INTERNATIONAL INC. | | 7554263 | 64829 | ARVINMERITOR INC | | 856504-3 | 99193 | HONEYWELL INTERNATIONAL INC. | | WCP856504-3 | 94330 | JSN INC |
|
Techincal Specification:
| BODY DIAMETER | 0.646 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.240 INCHES MINIMUM AND 1.290 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FEATURES PROVIDED | BY-PASS VALVE | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 20.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | FSC APPLICATION DATA | VALVE,CONTROL FLOW AIRCRAFT | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEST DATA DOCUMENT | 99193-856504-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|