|
|
|
National Stock Number:
1650-00-465-3738
Federal Supply Class:
1650
National Item Identification Number:
004653738
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 55580 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | R9W1146-826-2 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 1000.0 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | DRIVE,CONSTANT SPEED,AIRCRAFT HYDRAULIC SYSTEM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEST DATA DOCUMENT | 99167-C55580 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|