|
|
|
|
 | 5342-00-007-0511 | BRACKET,BELLCRANK,ALTERNATE RELE | 07/06/1972 |
|
 | 5342-00-007-0511 | BRACKET,BELLCRANK,ALTERNATE RELE | | 0 |
|
 | 2-40732-2 | BRACKET |  QUALITY AVIATION, INC | 1 | | 2-40732-2 | | WILLIAMS AEROSPACE & MANUFACTURING INC | 0 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | 2-40732-2 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 76823 | | 2-40732-2 | DERCO AEROSPACE, INC. | 8X044 | | 2-40732-2 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | 0JRC1 | | 2-40732-2 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 79U29 |
For additional information Register for Free Trial
|
 | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MAGNESIUM ALLOY,QQ-M-56,APPROX 4.000 IN. LG,2.500 IN. W,2.250 IN. H,PART OF MECHANISM INSTALLATION,MAIN LANDING GEAR ALTERNATE RELEASE PART NUMBER 3-40803-1,APPL TO T38A AIRCRAFT |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 4094.23 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | BRACKET,BELLCRANK,ALTERNATE RELEASE CONFIGURATION CONTROL ITEM NORTHROP GRUMMAN SYSTEMS CORP DBA AIR COMBAT SYSTEMS INTEGRATED SYSTEMS SECTOR DIV., CAGE: 76823 DWG 2-40732, REV B, DTD 23 SEPT 63 P/N 2-40732-2 APPROVED SOURCE(S): DERCO AEROSPACE INC. CAGE 8X044 CRITICAL CHARACTERISSTICS: MATERIAL, CLASS IIA CASTING EXCEPTION DATA TO DWG 2-40732 REV B AS FOLLOWS: 1. MARK & IDENTIFY PER MIL-STD-130 IN LIEU OF IM-8. 2. STRAIGHTENING OF ALUM AND MAG CASTINGS PER MA-82 IN LIEU OF MA-37 3. DIMENSIONS & TOLERANCES PER ASME Y14.5 IN LIEU OF 20Y201 4. ROUGH CASTINGS PER ASTM B 80 IN LIEU OF QQ-M-56 5. SURFACE ROUGHNESS PER ASME B46.1 IN LIEU OF MIL-STD-10 6. PENETRANT INSPECTION PER IT-60 IN LIEU OF IT-32 *****END OF EXCEPTION DATA***** GOVERNMENT FIRST ARTICLE: Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer. Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows: Inspection at origin (Source)- Enter the DCMA office DODAAC listed on page 1 of the contract. Acceptance by other-Enter the issue by office DODAAC listed on page 1 of the contract. Ship to code-Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4). FIRST ARTICLE TEST MARKING INSTRUCTIONS: FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package. IDENTIFY TO: MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). CASTING AND FORGING: Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil TECH DATA: DSCR DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT. SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI). . SOURCE INSPECTION REQUIRED . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. | Cage# 8X044 and PartNumber# 2-40732-2
Cage# 0JRC1 and PartNumber# 2-40732-2
Cage# 76823 and PartNumber# 2-40732-2 |
|
| | | IT-60-05C1115-H | DWG | BASIC | CN | 03/10/2005 | 05/14/2013 | 76823 | | IT-60 | DWG | BASIC | SS | 12/20/2012 | 04/20/2013 | 76823 | | FH-21 | DWG | BASIC | CN | 02/10/2005 | 04/08/2013 | 76823 | | FH-1 | DWG | BASIC | SS | 12/20/2012 | 03/27/2013 | 76823 | | FH-21 | DWG | BASIC | SS | 12/20/2012 | 03/27/2013 | 76823 | | FH-1 | DWG | BASIC | CN | 02/17/2005 | 03/27/2013 | 76823 | | 200925111 | DWG | BASIC | DD | 10/19/2012 | 03/06/2013 | 98747 | | 200925111 | DWG | BASIC | CN | 10/30/2012 | 12/19/2012 | 98747 | | 200925111 | DWG | BASIC | DD | 04/16/2012 | 06/03/2012 | 98747 | | 2-40732 | DWG | BASIC | CN | 06/14/2010 | 07/20/2010 | 76823 |
|
|
|
|
|
|
|
|