|
|
|
|
 | 5331-00-498-5733 | O-RING | 03/29/1972 |
|
 | 5331-00-498-5733 | O-RING |  = Manual available. | 0 |
|
 | M259881-011 | PACKING | | 1500 | | M25988-1-011 | PACKING | | 0 | | M259881-011 | PACKING |  DEFENSE & DEVELOPMENT ENTERPRISES LLC | 600 | | MIL-R-25988/1 | PACKING | GMS INTERNATIONAL CORPORATION | 0 | | R1306-11 | PACKING | ILN TECHNOLOGIES, INC. | 7 | | R1306-11 | PACKING | ILN TECHNOLOGIES, INC. | 30 | | M25988/1-011 | ORING | AERO PRECISION INDUSTRIES LLC | 36 | | M25988-1-011 | PACKING | VELOCITY AEROSPACE - BURBANK, INC. | 1 | | M25988/1-011 | PACKING, P | TIGER ENTERPRISES & TRADING, INC | 3 | | M25988/1-011 | O-RING | USS CO INC | 8 | | M25988/1-011 | HARDWARE | CONCORD COMPONENTS INC | 47 | | M25988-1-011 | O-RING | AVBORNE ACCESSORY GROUP, INC. | 16 | | M259881-011ES | O-RING | HUSSAIN RASHIK | 1698 | | A60W1175A03 | O-RING | HUSSAIN RASHIK | 1698 | | F952-6 | O-RING | HUSSAIN RASHIK | 1698 | | MIL-R-259881 | O-RING | HUSSAIN RASHIK | 1702 | | M259881-011 | O-RING | HUSSAIN RASHIK | 1698 | | F952-6 | O-RING | HUSSAIN RASHIK | 1698 | | M25988-1-011 | PACKING PREFORMED | BOEING DISTRIBUTION, INC. | 99 | | M259881-011 | PACKING | DIXIE AIR PARTS SUPPLY, INC. | 52 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | A60W1175A03 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HE | 92003 | | F952-6 | FARGO RUBBER CORP | 08529 | | MIL-R-25988/1 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 | | 2-011L1120-70 | PARKER-HANNIFIN CORP | 02697 | | M25988/1-011 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 | | 19483 | SYSTEMES DE CONTROLES GOODRICH LTEE | 99595 | | MS25988/1-011 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 | | M25988-1-011 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 | | M25988/1-011ES | ERIKS B.V. | H2313 | | H733-4-11 | BURKE INDUSTRIES PUROSIL DIV | 07096 |
For additional information Register for Free Trial
|
 | CROSS-SECTIONAL HEIGHT | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | CENTER HOLE DIAMETER | 0.294 INCHES MINIMUM AND 0.308 INCHES MAXIMUM | | ELONGATION PERCENTAGE | 125 MAXIMUM | | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL | | MATERIAL | RUBBER FLUOROSILICONE CLASS FQ |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | T | ACQUISITION OF THIS PART IS CONTROLLED BY QPL PROCEDURES. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. | | U.S. Coast Guard. | GP | U.S. Coast Guard. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | O-RING THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI) . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. QAP EQ003 APPLIES CRITICAL ITEM - SOURCE INSPECTION REQUIRED. THIS IS A SAFETY CRITICAL ITEM. ************************************* PRODUCT VERIFICATION TESTING (PVT) MANDATORY PRIOR TO CONTRACTOR'S SHIPPING OF MATERIAL. ************************************* Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. | | Cage# H2313 and PartNumber# M25988/1-011ES |
|
| | | QAP-EQ003 | QAP | BASIC | QA | 05/16/2013 | 10/29/2013 | 14153 | | MIL-DTL-25988C | AST | BASIC | | 10/03/2006 | 10/03/2006 | | | MIL-R-25988/1A NOT 4 | AST | BASIC | | 10/03/2006 | 10/03/2006 | |
|
|
|
|
|
|
|
|