|
|
|
|
 | 5331-00-492-2070 | O-RING | 07/02/1974 |
|
|
 | M259881-905 | PACKING | | 1560 | | M25988-1-905 | PACKING |  | 17 | | M25988/1-905 | O-RING | KASTLE AVIATION, INC. | 425 | | M25988-1-905 | PACKING | DEFENSE & DEVELOPMENT ENTERPRISES LLC | 118 | | MIL-R-25988 | SHEET | GALI CORPORATION | 979 | | M25988/1-905 | PACKING,PREFORMED | MDC AIRCRAFT SERVICE | 384 | | M25988-1-905 | | AVITAN CORP. | 17 | | M259881-905 | O-RING | CBOL CORPORATION | 55 | | M259881-905 | | ATF AEROSPACE LLC | 76 | | M25988-1-905 | PACKING | AVBORNE ACCESSORY GROUP, INC. | 5 | | MIL-R-25988 | PART | HUSSAIN RASHIK | 23 | | M259881-905 | PACKING O-RING | HUSSAIN RASHIK | 29 | | M25988-1-905 | ORING: FLUOROSILICONE,70A | BOEING DISTRIBUTION, INC. | 99 | | M259881-905 | ORINGS-ALL RBR | JACON AIRCRAFT SUPPLY CO., INC | 2822 | | M25988-1-905 | PACKING | TIGER ENTERPRISES & TRADING, INC | 11 | | 035001 | ROTRON | RESION LLC | 1 | | M25988/1-905 | HARDWARE | CONCORD COMPONENTS INC | 95 | | M259881-905 | O-RING | COMPONENT CENTRAL, INC. | 3 | | M25988/1-905 | PACKING | CHRISBARRY AIRCRAFT CORP | 15 | | M25988/1-905 | O-RING | SEAL DYNAMICS LLC | 9 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | CL25C85 | GRIMES AEROSPACE COMPANY | 72914 | | MILR25988 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 | | M25988-1-905 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | D9182 | | 25C85-75 | GRIMES AEROSPACE COMPANY | 72914 | | M25988-1-905 | THE BOEING COMPANY | 76301 | | M25988/1-905 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 | | 035001 | SAFRAN MARTIN-BAKER FRANCE | F0754 | | M25988/1-905ES | ERIKS B.V. | H2313 | | P33367 | MARTIN-BAKER AIRCRAFT COMPANY LIMITED | U1604 | | MIL-DTL-25988/1 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 |
For additional information Register for Free Trial
|
 | OUTSIDE DIAMETER | 0.558 INCHES NOMINAL | | CROSS-SECTIONAL HEIGHT | 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | CENTER HOLE DIAMETER | 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM | | ELONGATION PERCENTAGE | 125 MAXIMUM | | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL | | MATERIAL | RUBBER FLUOROSILICONE CLASS FQ |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | T | ACQUISITION OF THIS PART IS CONTROLLED BY QPL PROCEDURES. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI) . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. . O-RING . MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY . THIS IS A SAFETY CRITICAL ITEM. ************************************* PRODUCT VERIFICATION TESTING (PVT) MANDATORY PRIOR TO CONTRACTOR'S SHIPPING OF MATERIAL. ************************************* QAP EQ003 APPLIES CRITICAL ITEM - SOURCE INSPECTION REQUIRED. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. | Cage# F0754 and PartNumber# 035001
Cage# H2313 and PartNumber# M25988/1-905ES
Cage# U1604 and PartNumber# P33367 |
|
| | | MIL-DTL-25988C | AST | BASIC | | 10/03/2006 | 10/03/2006 | | | MIL-R-25988/1A NOT 4 | AST | BASIC | | 01/01/1900 | 10/03/2006 | | | QAP-EQ003 | QAP | BASIC | QA | 09/10/1998 | 09/23/2006 | 14153 |
|
|
|
|
|
|
|
|