|
|
|
|
 | 5315-00-494-0957 | PIN,DRAG BRACE | 10/02/1970 |
|
 | 5315-00-494-0957 | PIN,DRAG BRACE | | 0 |
|
 | 1707A139 | HARDWARE |  GALI CORPORATION | 83 | | 004940957.5315 | PIN,DRAG BRACE | SECO PARTS & EQUIPMENT CO | 2 | | 1707A139-C01 | PIN, DRAG BRACE, APEX | ONTIC ENGINEERING & MANUFACTURING, INC | 1 | | 1707A139 | PIN, DRAG BRACE, APEX | ONTIC ENGINEERING & MANUFACTURING, INC | 1 | | 1707A-139 | PIN,DRAG | DAVINCI AIRCRAFT, INC. | 1 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | 1707A139 | GOODRICH CORPORATION | 13002 | | 1707A139 | ONTIC ENGINEERING & MANUFACTURING, INC | 45934 |
For additional information Register for Free Trial
|
|
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 3 | ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 9964.42 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | PIN, DRAG BRACE MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). FIRST PIECE PRODUCTION LOT TESTING/INSPECTION APPLIES CDRL PROVISIONS APPLY Production Lot Testing Required - Contractor Testing Production Lot Quantity, Number of Samples is 2 Number of calendar days for internal review of the Contractor's PLT testing report and recommendation for approval or disapproval to the Contractor is 45 days. 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THE FOLLOWING CRITICAL CHARACTERISTICS APPLY (REFERENCE DRAWING 1707A139): A. MATERIAL B. HEAT TREAT C. PER PRINT DETAIL "A", THE FOLLOWING DIMENSIONS: --- .05 R --- .010/.015 R --- .125 DIMENSION --- 30 DEG ANGLE D. PER PRINT DETAIL "B", THE FOLLOWING DIMENSIONS: --- .04/.08 DISTANCE --- .13/.16 DISTANCE --- .040 RADIUS --- 17/13 DEG ANGLE --- 2.290/2.280 DIA. ADDITIONAL CHECKS: A. THE TWO CHROME PLATED JOURNAL FINAL FINISH DIMENSIONS WILL REQUIRE EITHER A QA CHECK OR DOUBLE VERIFICATION. ON THE LARGER JOURNAL THE FINISH DIMENSION IS 2.3185/2.3178" AND THE SMALLER JOURNAL IS 1.9085/1.9078" B. CHECK THAT GREASE CHANNEL IS CLEAR THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI). ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. | Cage# 45934 and PartNumber# 1707A139
Cage# 13002 and PartNumber# 1707A139 |
|
| | | QAP-106 | QAP | BASIC | QA | 08/01/2006 | 07/09/2012 | 13873 | | QAP-028 | QAP | BASIC | QA | 06/04/2009 | 06/12/2009 | 13873 | | CDRL-G-ONTICBOA-09140 | QAP | BASIC | QA | 05/13/2009 | 06/03/2009 | 13873 | | QAP-106 | QAP | BASIC | QA | 04/14/2004 | 09/24/2006 | 13873 |
|
|
|
|
|
|
|
|