|
|
|
|
 | 5305-00-022-8992 | SCREW,MACHINE | 01/01/1961 |
|
 | 5305-00-022-8992 | SCREW,MACHINE |  = Manual available. | 0 |
|
 | FFS92 | SCREW,MACHINE |  HUSSAIN RASHIK | 230 | | FFS92 | SCREW | GMS INTERNATIONAL CORPORATION | 0 | | FFS92 | SCREW | GALI CORPORATION | 2113 | | FFS92 | SCREW, MACHINE | HERMES TECHNICAL INTERNATIONAL, INC | 47 | | FFS92 | SCREW | MIDWEST AEROSPACE, LTD. | 67 | | FFS92TYPE1STYLE2S | SCREW, MACHINE | MIDWEST AEROSPACE, LTD. | 129 | | FFS92 | HARDWARE | CONCORD COMPONENTS INC | 205 | | FF-S-92 | HARDWARE | CONCORD COMPONENTS INC | 188 | | FFS92TYPE1STYLE2S | SCREW,MACHINE | HUSSAIN RASHIK | 302 | | FF-S-92 | SCREW,MACHINE | HUSSAIN RASHIK | 3512 | | FFS92TYPE1STYLE2S | SCREW,MACHINE | SONICARE SOLUTIONS INC | 150 | | FFS92 | SCREW | PCS AEROSPACE & MARKETING LLC | 296 | | FFS92 | SCREW | HAYWARD AND GREEN DEFENCE LTD | 982 | | FFS92 | SCREW | KAMTECH SYSTEMS LTD | 1 | | FF-S-92 | SCREW;MACHINE | AIR & GROUND AVIATION INC | 1756 | | FFS-92 | SCREW;MACHINE | AIR & GROUND AVIATION INC | 8 | | FFS92. | SCREW | AIR & GROUND AVIATION INC | 150 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | FF-S-92 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERV | 81348 | | FFS92TYPE1STYLE2S | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERV | 81348 | | MS35237-165 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM | 96906 | | 228992 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | 21450 | | 228992 | GENERAL MOTORS CORP | 24617 |
For additional information Register for Free Trial
|
 | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 2.000 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 1.002 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 20.78 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | SCREW MACHINE 0.625 inches-11 UNC -2A X 2.00 inches LG AWARDS OF THIS NSN MUST BE SOURCE INSPECTED UNLESS AWARDED TO A QSLM/QSLD SUPPLIER THAT IS LISTED ON THE APPLICABLE QSL LIST AND SUPPLYING MATERIAL THAT IS IN COMPLIANCE WITH THE QSL PROGRAM. THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO MARKING REQUIREMENTS DEFINED BY TECHNICAL DATA, THE MANUFACTURER'S SYMBOL IS REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM. THE MANUFACTURER'S SYMBOL MUST BE LISTED IN MIL-HDBK-57. DO NOT PLACE ANY MARKINGS ON BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT REQUIRED ON FASTENERS WITH A THREAD DIAMETER OF 0.190 INCHES AND SMALLER. FOR MANUFACTURER'S SYMBOL REGISTRATION INFORMATION AND INQUIRIES PLEASE VISIT THE MIL-HDBK-57 URL AT: http://www.troopsupport.dla.mil/ce/prod_services/logore g.asp ************************************************ QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/ QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT OCTOBER 1999) FOR FSC'S 5305, 5306, 5307 AND 5310 (NUTS). ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION (CLASS 2 FASTENERS). SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION. ANY BID/QUOTE/OFFER/BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR. ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND DLAD 52.246-9064, IF REFERENCED, DO NOT APPLY. FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE: http://www.troopsupport.dla.mil/ce/qsl/ -OR- WRITE TO: DLA TROOP SUPPORT ATTN: DLA TROOP SUPPORT - NASA, BLDG 6/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092 ************************************************ MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. |
|
| | | NASM35190 | OTH | BASIC | | 07/16/2010 | 07/16/2010 | | | MS35237 | AST | BASIC | | 10/03/2006 | 10/03/2006 | |
|
|
|
|
|
|
|
|