|
|
|
|
 | 1560-00-545-5115 | BRACKET,DOOR DOWNLOCK | 01/01/1963 |
|
 | 1560-00-545-5115 | BRACKET,DOOR DOWNLOCK |  = Manual available. | 0 |
|
 | 340055 | BRACKET, DOOR |  DEFENSE & DEVELOPMENT ENTERPRISES LLC | 1 | | 340055 | BRACKET | USS CO INC | 1 | | 340055 | BRACKET | CHRISBARRY AIRCRAFT CORP | 95 | | 340055 | BRKT | EQUIPMENT & SUPPLY INC | 28 | | 340-055 | GATE ELECTRONIC | QUALITY AVIATION, INC | 1 | | 340055 | BRACKET | INRI INC | 1 | | 340055 | BRACKET;DOOR DOWNLOC | AIR & GROUND AVIATION INC | 4 |
For additional information Register for Free Trial
|
|
|
 | 340055 | LOCKHEED MARTIN CORP | 98897 |
For additional information Register for Free Trial
|
 | GENERAL CHARACTERISTICS ITEM DESCRIPTION | CRES,AMS 5350,410,12.5 CR,3.000 IN. LG,2.800 IN. W |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 3 | ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | L | THE ANNUAL BUY VALUE OF THIS PART FALLS BELOW THE SCREENING THRESHOLD OF $10,000 BUT IT HAS BEEN SCREENED FOR KNOWN SOURCE(S). (NOTE: THIS CODE SHALL NOT BE USED WHEN SCREENING PARTS ENTERING THE INVENTORY. IT SHALL NOT BE ASSIGNED IN PREFERENCE TO OR SUPERSEDE ANY OTHER AMSC.) VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 2953.23 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | BRACKET,DOOR DOWNLOCK LOCKHEED MARTIN CORP., EXCEPTIONS: TWO "0" .321/.313 DIA HOLES, & TWO (2) 6.4 MM .257/.249 DIA HOLES OMITTED. MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). DSCR MAY NOT HAVE AN APPROVED BIDSET FOR THIS NSN. SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil | | Cage# 98897 and PartNumber# 340055 |
|
|
|
|
|
|
|
|
|