Search Criteria

NSN/NIIN No.:
Part No. :
(13-16 digit NSN/9 digit NIIN)
6640-00-477-07685998-00-477-0766
NSNDescriptionAssign Date
1560-00-477-0767SKIN,AIRCRAFT06/11/1971
NSNDescriptionDetailOpen Solicitations
1560-00-477-0767SKIN,AIRCRAFT0
Part NumberDescriptionCompanyQuantity
3W34385-113SKIN CALPORT AVIATION COMPANY1
For additional information Register for Free Trial
CompanyAward DateQuantityPriceContractDelivery Date
Free Trial05/01/1982Free TrialFree TrialF3460182G0012
For additional information Register for Free Trial
Part NumberCompanyCAGE
3W34385-113LOCKHEED MARTIN CORP98897
3W34385-115LOCKHEED MARTIN CORP98897
For additional information Register for Free Trial
NameValue
END ITEM IDENTIFICATIONC-141
For additional information Register for Free Trial
CodeDefinition
ACQUISITION METHOD CODE.
'All Departments3ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER.
ACQUISITION METHOD SUFFIX CODE.
'All DepartmentsQTHE GOVERNMENT DOES NOT HAVE ADEQUATE DATA, LACKS RIGHTS TO DATA, OR BOTH, NEEDED TO PURCHASE THIS PART FROM ADDITIONAL SOURCES. VALID AMCS: 1, 2, 3, 4 AND 5.
MAJOR ORGANIZATIONAL ENTITY.
Air ForceDFAir Force
NavyDNNavy
Defense Logistics Agency.DSDefense Logistics Agency.
PRICE
All DepartmentsPrice661.20
PRECIOUS METALS INDICATOR CODES.
All DepartmentsAItem does not contain Precious Metal.
CRITICALITY CODE.
All DepartmentsXThe item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
AUTOMATIC DATA PROCESSING EQUIPMENT.
All Departments0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9).
ELECTROSTATIC DISCHARGE CODE.
All Departments
HAZARDOUS MATERIALS INDICATOR CODE.
All DepartmentsPIndicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
DEMILITARIZATION CODE.
All DepartmentsQCommerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8).
For additional information Register for Free Trial
SKIN,AIRCRAFT LOCKHEED MARTIN CORP. LOFT DATA 3R25004 IS REQUIRED TO MFG THIS PART. EXCEPTIONS: LEAVE 1/8 INCH EXCESS TRIM AT FLAP MATING EDGES THREE SIDES AND OMIT COUNTERSINKS FROM ATTACH HOLES. THE FOLLOWING APPLIES TO ALL C-130/C-141 PANELS. IT ALSO APPLIES TO C-5 PANELS THAT ARE NOT CONSIDERED PRIMARY STRUCTURE THAT REQUIRE THE STP60-101. USE STP60-102 AND ECO 96C0006. NOTE: ON ECO 96C0006 PARAGRAPH 3.E ADD FM490A AS AN ADDITIONAL ADHESIVE. ON PAGE 8 OF ECO 96C0006 PARA 7.M, ADD #6: COPY OF CURRENT CONTRACT. USE ECO 98C0001 AND 98C0002 TO STM30-102. USE ECO 98C0001 TO LAC 2017 USE ECO 98C0001 TO LAC 0120 USE LS5898 AND ECO 96C0001 ...END OF SPECIAL INSTRUCTIONS... IDENTIFY TO MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). TECH DATA AVAILABILITY DSCR MAY NOT HAVE AN APPROVED BIDSET FOR THIS NSN. SAMPLING 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.
Cage# 98897 and PartNumber# 3W34385-113